HP Switch ProCurve 2510G-48 48 Port Gigabit

HP Procurve Switch 2510-48G

Data transmission
Jumbo frames support: Y
MAC address table: 8000 entries
Maximum data transfer rate: 1 Gbit/s
Packet buffer memory: 1.5 MB
Supported data transfer rates: 10/100/1000 Mbps
Switching capacity: 96 Gbit/s
Throughput: 71.4 Mpps
Design
Electromagnetic compatibility: FCC Class A; VCCI Class A; EN55022/CISPR-22 Class A; IEC/EN 61000-3-2; IEC/EN 61000-3-3
Form factor: 1U
Product colour: Black
Rack mounting: Y
Safety: cUL (CSA 22.2 No. 60950); EN 60950/IEC 60950; NOM-019-SCFI-1994; UL 60950
Stackable: Y
Management features
Quality of Service (QoS) support: Y
Switch layer: L2
Switch type: Managed
Connectivity technology: Wired
Dimensions (WxDxH): 442 x 322.6 x 43.2 mm
Electromagnetic immunity: EN 55024, CISPR 24; IEC 61000-4-2; IEC 61000-4-3; IEC 61000-4-4; IEC 61000-4-5; IEC 61000-4-6; IEC 61000-4-8; IEC 61000-4-11; EN 61000-3-2, IEC 61000-3-2; EN 61000-3-3, IEC 61000-3-3
I/O ports: 44 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T); Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only; Media type: Auto-MDIX; 1 RJ-45 serial console port; 4 dual-personality ports - each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers)
Input frequency: 50 / 60 Hz
Input voltage: 100-127 / 200-240 VAC V
Latency:
Management platform: ProCurve Manager Plus; ProCurve Manager; command-line interface; Web browser; out-of-band management (serial RS-232C)
Memory and processor: MIPS 264 MHz, 16 MB flash, 64 MB SDRAM; packet buffer size: 1.5 MB
Operating altitude (imperial): up to 10000 ft.
Power requirements: 100-127 VAC/200-240 VAC; 50/60 Hz
Size: 32.3 cm
Weight (imperial): 8.6 lb. lbs